1
of
3
hologram deportive car Teenage wall murals
Reference: F6927
From
RM110.90
Information hologram deportive car Teenage wall murals
Welcome to our hologram deportive car teenage wall mural! This stunning design features a holographic car that will bring your teenager's room to life. The hologram effect adds a unique touch, making it a standout piece of decoration. The vibrant colors and dynamic design will transform any space into a cool and stylish environment!
why this product should be use for the decoration
Our hologram deportive car murals for teenage bedrooms are the perfect choice for adding a touch of excitement to any space. The holographic effect creates a futuristic and dynamic atmosphere, while the car design adds a sporty and adventurous vibe. Transform your teenager's room into a space they'll love to show off!how to apply this product
Applying our hologram deportive car wall mural is easy and fun! Simply use the provided tools, including a roller and brush, to apply the non-woven wallpaper to the wall. The vibrant design will instantly liven up the room, creating a bold statement that your teenager will adore!Buy now at a discount!
Installation tools
Material: Non-woven wallpaper (TNT)
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
You will receive your photo mural carefully rolled in 50 cm rolls and secured with tape to keep it compact.
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Hanging wallpaper or photo murals requires proper preparation and following the steps.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Standard 15 days home delivery.
Express delivery within 72 hours to your home address available.
Express delivery within 72 hours to your home address available.
These shipping conditions are indicative and non-binding. The final delivery times and costs will be shown when selecting the final delivery address and transport agency.
4 / 5
of 8 happy customers
Ratings
Reviewed in
the
12/03/2026
at
12:15 h
the
12/03/2026
at
12:15 h
Reviewed in
the
15/12/2025
at
01:18 h
the
15/12/2025
at
01:18 h
Reviewed in
the
11/09/2025
at
19:00 h
the
11/09/2025
at
19:00 h
Reviewed in
the
21/06/2025
at
09:14 h
the
21/06/2025
at
09:14 h
Reviewed in
the
13/03/2025
at
09:26 h
the
13/03/2025
at
09:26 h
Reviewed in
the
23/12/2024
at
19:31 h
the
23/12/2024
at
19:31 h
Reviewed in
the
13/09/2024
at
00:38 h
the
13/09/2024
at
00:38 h
Reviewed in
the
13/06/2024
at
19:38 h
the
13/06/2024
at
19:38 h