Navy blue colour wallpaper vertically striped
Reference: P6334Our navy blue colour wallpaper vertically striped features a stunning design with bold, vertical lines in shades of navy blue and white. The graphic design is visually striking, adding a touch of elegance and sophistication to any space. The satin finish of our stickers ensures that there are no reflections with interior or exterior light, while still providing excellent color intensity. These stickers can be easily cleaned with a damp cloth and a little neutral soap, making maintenance a breeze. With a grammage of 80 microns and a built-in adhesive, our stickers are durable and resistant, offering a lifespan of 8-10 years. They are suitable for placement on any flat surface and can be customized to the customer's desired size. Easy to install and made with top-quality materials, our stickers are a perfect choice for adding a stylish touch to any room.
Why this product should be used for decoration
Our navy blue colour wallpaper vertically striped is the perfect choice for decoration, adding a touch of elegance and sophistication to any space. The bold, vertical lines in shades of navy blue and white create a visually striking design that is sure to make a statement in any room. The unique graphic design adds a sense of style and individuality to the decor, making it a perfect choice for those looking to enhance their living space.
How to apply this product
Applying our navy blue colour wallpaper vertically striped is a simple process that can be done by anyone. Begin by cleaning the surface where the sticker will be applied, then carefully peel off the backing and position the sticker on the desired area. Smooth out any air bubbles using a squeegee or similar tool, and voila! Your space is transformed with a stylish and sophisticated design.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.