Ornate Scallop Pattern ornamental wallpaper
Reference: P8346The image displays an ornate scallop pattern with symmetrical shapes and decorative details. Its intricate design exudes classic elegance, making it suitable for spaces that aim to convey refined aesthetics.
The Ornate Scallop Pattern ornamental wallpaper is a stunning addition to any room with its seamless, elegant design. The pattern features a symmetrical and decorative scallop design, adding a touch of ornate sophistication to the space. The matt colours give it a luxurious look, and the non-woven material ensures durability and easy application. It should be applied with glue using a roller, brush, and cutter. Cleaning is a breeze with just a damp cloth and neutral soap. With a grammage of 180 grams per square metre and a durability of 10-15 years, this wallpaper is a long-term investment. Plus, it can be easily removed by wetting the product with a sprayer, making it a versatile choice. Produced and shipped in 50-centimetre wide rolls, this wallpaper is a perfect option for adding a touch of elegance and charm to any space!
Why this product should be used for decoration
The Ornate Scallop Pattern ornamental wallpaper is the perfect choice for adding a touch of elegance and sophistication to any room. Its seamless and symmetrical design, along with the decorative scallop pattern, creates a luxurious atmosphere. Whether it's for a living room, bedroom, or office space, this wallpaper adds a unique charm that is sure to impress!
How to apply this product
Applying the Ornate Scallop Pattern ornamental wallpaper is a simple process. Use glue, a roller, brush, and cutter for easy application. The non-woven material ensures durability, and cleaning is a breeze with just a damp cloth and neutral soap. With a grammage of 180 grams per square metre and a durability of 10-15 years, this wallpaper is a long-term investment. Plus, it can be easily removed by wetting the product with a sprayer, making it a versatile choice for any space!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 72 hours to your home address available.